Icematic SW 20 Synthetic refrigerator oil
Describe£º
They are specifically designed for use with refrigeration systemsusing environmentally friendly HFC refrigerants, in particular R134a.In addition, the Icematic SW series are also suitable for use in mostsystems using refrigerant R12andR22.
Distinction£º
The synthetic base stocks used in the Icematic SW range are fullymiscible with HFCs, in particular R134a, even at temperatures well below the minimum likely to be encountered in service. They are also fully miscible with refrigerant R12.
Icematic SW grades have been formulated using a unique low
treatment additive package to enhance hydrolytic stability, load carrying and inhibition against copper plating. They are wax free and hence have very low pour points. This makes sure that evaporator internals remain clean (consequently efficient heat transfer) and avoids pipe blockages.
Data£º
TYPICAL DATA |
Icematic SW 20 |
Viscosity@ 40¡æ,cSt£¬ASTM D445 |
20 |
Viscosity@100¡æ,cSt£¬ASTM D445 |
4.4 |
Pour Point (¡æ)£¬ASTM D97 |
-60 |
Closed flash point (¡æ)£¬ASTM D93 |
230 |
TAN(mgKon/g)£¬ASTM D664 |
0.05 |
Water (ppm)£¬ASTM D1744 |
50 |
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification
Similar Products:ArChine Refritech POE 22
Emkarate RL 5/7/10/15/22 H
cross reference ArChine Refritech POE 5/7/10/15/22
|
